Descriptions
Many varied kind of exterior wall coatings exist in the world construction market. The traditional solvent containing exterior coating is replaced by water base coating in the European and American market. The solvent type building coating cures by volatilizing solvent and generates much harmful gas damaging Ozonosphere. SWD Urethane Co., USA developed one component water base environment friendly exterior wall coating for safety and Eco friendly, it gained much attention of customers once entered market.
Characteristics SWD Urethane CO., USA developed one component room temperature cure water base exterior wall anticorrosion waterproof decoration coating in the 1980s. The coating is green Eco friendly, safe and solvent free, with no harmful gas volatile during application. The coating has been widely applied in the building circles after launched and gained good social and economy effect. It has smooth and flat appearance, dense and tough, with high adhesive strength, high performance of acid and alkali resistance, anti-aging, anti-mildew, anticorrosion and waterproof. It is a safe Eco friendly solvent free product with high integration performance in the current exterior coating industry.
Specifications
State in containers no blocks after mix, uniform
Performance convenient
Stability in low temperature no deterioration
Tack free time ≤2h
Appearance normal
Contract ratio ≥0.90
Water resistance (96h) normal
Alkali resistance (48h) normal
Washing resistance ≥2000 times
Stain resistance < 30%
Temperature variation (5 circles) normal
Artificial weathering resistance (4000h) no bubbles, no peel, no crack
Pulverization ≤ 1class
Color changing ≤ 2 class
Tensile strength in normal conditions ≥ 1.0Mpa
Fracture in normal conditions ≥200%
Elongation -10 ℃ ≥40%
Heat treatment ≥100%
Data of performance
Color Multiple colors as customers’ need
Luster half glazed
Density 1.27g/cm3
Volume solid content 63% ±2%
VOC 0
Recommended dry film thickness 30-80μm
Theoretical coverage 0.12kg/sqm (calculated by the above solids percentage and dry film thickness of 50 microns)
Practical coverage Allow appropriate loss rate
Dry time summer: 1-3h winter: 3-6h
Overcoating interval min: 3h, max: 28h
Overcoating method airless spray, air spray, brush, roller
Flash point no flammable, no explosive, safe and Eco friendly
Recommended procedures
No | Name of the products | Layers | Dry film thickness (μm) |
1 | SWD one component room temperature cure water base interior & exterior primer | 1 | 30 |
2 | SWD one component water base exterior anticorrosion waterproof decoration coating | 2 | 70μm/ layer |
Total | | 3 | 170 |
Application scopes Building exterior anticorrosion waterproof decoration (including residential and industrial buildings)
Shelf life 12 months (Indoor with dry and cool conditions, frozen below 0℃)
Packing 20kg/ bucket, 25kg/bucket