polyurea uv metal/tiles coating paint
I.Outstanding insulation
the surface Temperature of regular roof may reaches to 70 °C, however, with this UV resistance coating on, the number drops to 50 °C or even lower. Outer wall temperature difference reaches more than 20 °C, while the inner room temperature drops 3 °C---5 °C.
II.Outstanding ageing resistance
The film remains good after undergoing a 10,000 h aging test in natural conditions with 2,000 times scrubbing.
III. Anti-corrosion performance
This film may endure corrosion caused by acid rain.
IV.Elasticity
With an elongation of 200%, the film would not fall off if there is roof crack or deformation
V.water based coatings
With no organic solvent, win "green star" certificate and UL certificate of the USA.
small package: 26L/bucet.
package: 55gallon/drum (210L)
Data sheet:
Sunshine emissivity | 83% | elongation | ≥200% |
Heat emissivity | 93% | rate of coverage (175um thick film•m2/L) | 2.3 |
Volume solid content | 80% | Surface Dry time | ≤ 2 h |
viscosity | 96-102 mPa•s | Total dry | ≤ 8 h |
Tensile strength | ≥1.5 Mpa | | |
Application scope:
1. Building concrete roof &outer wall
2. Roof of Industrial factory with color steel tile, outer wall of all portable buildings.
3. Concrete surface of Flyover, Dam and Reservoir Project
4. Aging resistance protection layer of polyurethane foam
Method of application:
1. Clean the surface of base material, keep it dry, no oil or dust.
2. Roller, hand brush, and spray possible.
3. Do it twice. Interval ≥3 h.
work on color steel tiles pic.
WORK ON ROOFING