When the vehicles got collision in the driving process, the vehicle body can easily get damaged and bring risks to the people inside the car. Therefore, it is important to choose a explosion protection material to protect the vehicles. SWD Urethane Co., USA developed explosion protection high strength coating, which has excellent performance of being tough, abrasion resistance and impact resistance. It has been widely used on American armored vehicles, police cars, special industry escort vehicles and sport utility vehicles.
Characteristics
The product has high reactivity, fast cure, can be sprayed forming on any bent, slope and vertical surfaces without sagging. Surface granulation, nice and feel comfortable. The coating film is dense, seamless, bond well with substrate that greatly increase the adhesive strength. It has excellent explosion protection, impact resistance and anti-collision, to protect the car body and decrease the damage of external force. Spray along with SWD polyaspartic anti-aging topcoat to protect the car body from color-changing, good decoration and safe.
Specifications
Adhesive strength (steel base) 12.3 Mpa
Tear strength 83.6kN/m
Tensile strength 19.5Mpa
Elongation 450%
Penetration resistance 2.6Mpa
Temperature variation -40------+120℃
Wear resistance (700g/500r) 4.3mg
Acid resistance (10%H2SO4 or 10%HCI, 30d) no rust no bubbles no peel
Alkali resistance 10%NaOH, 30d no rust no bubbles no peel
Salt resistance 30g/L, 30d no rust no bubbles no peel
Salt spray resistance 2000h no rust no bubbles no peel
Oil resistance 0# diesel crude oil 30d no rust no bubbles no peel
Recommended procedures
No. | Name of products | Layers | Dry film thickness(μm) |
1 | SWD polyurea special primer | 1 | 50 |
2 | SWD319 special vehicle explosion protection high strength coating | 1 | 2500 |
3 | SWD8029 polyaspartic anti-aging coating | 1 | 30 |
Total | | 3 | 2580 |
Application scope Transportation tools body protection of cars, SUV, buses, trucks, armored vehicles
Shelf life 10 months (Indoor with dry and cool conditions)
Packing Component A: 220kg/bucket, component B: 200kg/bucket